1, in order to prevent cutting to text or other content, please put the text and the required content within 3mm of the cutting line.
2, please save Coreldraw as CDR file format, if more than 10.0 version, it is recommended to save the curve as 8.0 version, so as to make up. Use Coreldraw special effects graphics, please convert to bitmap, bitmap at 350dpi is good.
3, Photoshop, please save TIF format, image files above 350dpi.
4, the color mode should be CMYK, if there are RGB mode of the picture, please first change to CMYK mode, so as to avoid different color modes caused by printing color difference.
5, the line is less than 0.076mm, or the monochrome color block or shading value is less than 8%, the printing will not be visible.
6, such as the front and back of the full plate color block, it is recommended that customers cover the film, otherwise the front is easy to produce rough edges (the edge of the place appears white), the back is also easy to appear over the bottom (the edge will appear a little other color).
