Image color and level adjustment
Image plays a very important role in the color newspaper. In the printing of the color newspaper, the image quality is good to reduce the color mixing time when printing.
1, to process the color images in the RGB mode
RGB mode is the color method used by devices based on optical principles, which can show more colors, especially bright and bright colors.
The editing processing of images often goes through many steps, such as combining the content of several images together, because the original color of the components can not be the same, they need to be adjusted. No matter what effect the image processing wants to achieve, the operator wants to make the picture as detailed as possible. Since the color range of the RGB mode is much larger than the CMYK mode, a wider color space and more variable editing effect will be obtained when processing images in the RGB mode. Although it eventually turns to CMYK, and there must be a color loss, it's much better than losing image color in the first place.
2. Image sharpness adjustment
Compared with high-grade printing, due to the limited printing materials and conditions, the number of image network lines is low, and the increase rate of printing outlets is high, so in the image adjustment of small color newspaper, a large sharpening value is used to improve the image clarity.
From the perspective of the network process, sharpening has the effect of eliminating the level loss due to the net process. Therefore, sharpening is a necessary step in the prepress processing. The degree of sharpening is related to the type and zoom of the original image. Usually, the character image is less sharp, while the larger of the landscape draft, the larger the image, the greater the sharpness; the higher the magnification, the deeper the sharpness.
3. Adjustment of the image level
The purpose of level adjustment is to first meet the printing requirements. According to the characteristics of the high increase rate of newspaper printing outlets, the increase of the network is compensated, and the main level is concentrated in the middle area, that is, 20%~60% of the visual sensitive area, so that the order of the original manuscript and the order of the printing can be reproduced to the maximum, so as to make the image clear and true. Secondly, according to the content and the level distribution of the original draft, ensure the accuracy of the important parts, such as the clothes and face of the characters must be clear, and the difference of the face level should not be less than 15%. In addition, adjust the value of extremely high light or extremely dark adjustment, not a large area of the network, the image dot order is generally controlled between 2% and 95%.
4. Image color adjustment
The adjustment of image color, also known as calibration color, mainly reproduces the color reflected in the original manuscript, rather than the color of the original manuscript itself. During the adjustment, mainly correct the color bias caused by the original manuscript or scanning to ensure the accurate color of the main part; and ensure the screen effect and the final printing effect. Note that newsprint has 3%~5% of gray scale, it is best to compare everything or compare the standard print, open the original digital file, compare the color. At the same time, the calibration color adjustment should be based on the information board display data, not only on the screen display effect.
5. convert RGB mode to CMYK mode
The image used for printing must be CMYK mode, so the image mode must be converted before release. The image in CMYK mode is not as bright as that in RGB mode. After conversion, the image should be checked first and determine that there is no biased color before output. If you are not satisfied, you should cancel the color mode conversion immediately, and do not convert it back to the RGB color mode, otherwise it will cause color loss.
Edition adjustment
The group edition process is also an important aspect that affects the quality of the color newspaper. The use of the layout color will affect the positioning, theme and style of the whole layout. Therefore, typesetting personnel must use color reasonably, make appropriate adjustments, so as to reduce the time to adjust color when printing, improve the printing quality of small color newspaper.
1. Image size adjustment
In the group edition process, the impact of image quality cannot be ignored. First of all, in the group version, do not randomly enlarge or shrink the image in the group version software. Reducing the image will make the effect worse and make the output slow; and the enlarged image affects the image effect more. If the size must be changed, it should be done in the image processing software.
Secondly, we should pay attention to the image of the word problem, not too much; do not use Yin word, otherwise it will affect the image effect.
Third, the text, image should keep a certain distance, do not squeeze or loose, so as not to affect the overall effect of text and text.
2. Processing skills of shading in the layout
The correct use of shading to make it a part of the layout language is an important part of printing the small color newspaper.
(1) The shading color selection should be reasonable
For yellow shading, it is best to use 100% pure yellow, because yellow is low on white newsprint, it is difficult to have high printing quality; If there are black characters in the shading, and black characters, purple, cyan, green, red shading less, because they are low with black characters, should avoid combination.
(2) base color with secondary pure color, pure color, less complex color
Because the complex color is multi-color overprinting, it will inevitably increase the difficulty of color tracking in small color newspaper printing, making the color difficult to print and prone to color bias phenomenon.
(3) Avoid adding color blocks to the text
Especially in the small word, it is easier to reduce the visibility of the text. The background color of the text should not be hindered reading as the premise, so there is a certain length of the small text, should be soft and light color background is appropriate, avoid the use of blue green, blue purple and other dark shading.
3. Processing method of layout text
Under normal circumstances, the body of the color newspaper is black, because black is the most visible on the white newsprint, and the least visual color stimulation to the reader, which can reduce the reading fatigue. If the content of the text must be colored words, generally suitable for purple, cyan and other highly visible colors on the newspaper, less gray, red and other low visible color, basically can not use yellow.
Source: http://news.naliyin.com/







